All fields are required.

Close Appointment form

Installing Residential Fire Sprinklers – Steve Kowkabany – Case Study

Installing Residential Fire Sprinklers – Steve Kowkabany – Case Study

4 Comments

.

Steve Kowkabany
Location: Neptune Beach, FL
Home Type: Single Family
Yr Built: 1974
Sq. Ft.: 1504
Yr Sprinklers Installed: 2008
Sprinkler Cost: $2500

Earlier in 2008, Steve Kowkabany decided to retrofit his house in Neptune Beach, FL with residential fire sprinklers. Steve works as a fire protection engineer and is a strong believer in the benefits of fire sprinklers. Recently, Steve got married and he and his wife are planning to have kids. He considers his new family a significant motivator to have the protection of fire sprinklers in his home.

Mack Riser

The fire sprinkler system riser located in the garage.

Steve’s home is a single story detached family home built in 1974 by Wade Brown Construction. The 1504 sq. ft. home is serviced by the City of Jacksonville Fire Department and was built when most home builders were not offering the option to install residential fire sprinklers. Since the home is single story and with Steve’s fire protection engineering expertise, he was able to complete the full fire sprinkler retrofit, performed by Evans Fire Protection, for only $2500.

One of the greatest benefits of having fire sprinklers in Steve’s home is that it saves him over $300 a year on his homeowner’s insurance premium. He receives a 20% discount, bringing his annual premium from $1542 to a discounted premium of $1226. Steve comments, “I can now verify that homeowners’ insurance policies do offer large discounts on your rates for sprinkler protection. I had a system installed about 6 weeks ago and after sending in the certificate of completion, recently got back a refund check for the current policy term and a letter stating that the rate would be permanently reduced 20% for adding sprinklers.”

Steve has not had any problems with his fire sprinkler system to date so there has been no maintenance cost. He does not expect maintenance to be a significant expense since residential fire sprinkler systems require very little maintenance.

Steve also decided to take an entertaining and truly unique approach in the design of his residential fire sprinkler system. A fire sprinkler system has an inspector’s test valve where the valve can be opened causing water to flow through the system. This simulates a fire sprinkler being activated to test that water is being adequately supplied to the system. Steve had the piping for the inspector’s test extended to the side of his home right next to the family garden. This allowed him to have some fun and get an added bonus from his residential fire sprinkler system. Steve explains, “my wife really digs the 6′ long orange Blazemaster inspector’s test connection that I had added onto the brick back wall of the house that allows me to test the system, demonstrate the operation of a sidewall head in the backyard, and water the garden all at the same time.”

Kowkabany Inspector Test Valve

The inspector’s test value next to the garden.

Thanks to Steve’s action to install residential fire sprinklers in his home, his family and future occupants of the home will have the peace of mind that comes from living with constant fire protection 24/7…and, let’s not forget the added bonus of a very well watered garden.

For more case study examples see the Case Studies Category


Is your home protected by a residential fire sprinkler system? If yes, we would like to know about it and feature you and your home in a case study. Download the “Installing Residential Fire Sprinklers Questionnaire” , answer the questions and return the completed questionnaire as indicated. We will use the information provided to publish a case study sharing your experience with residential fire sprinklers.







  • Share This



4 Responses to “Installing Residential Fire Sprinklers – Steve Kowkabany – Case Study”

  1. Was the flow switch ever tied into anything? I’m not familiar with the device beneath the Watts DCVA, presumably for the domestic tie in. It almost looks like an in-line proportioner for foam systems. What is it?

    Regards
    Dave

  2. Dont Know about Florida, but in Connecticut blazemaster isn’t supposed to be exposed to light… voids the warranty

  3. I assume you mean sunlight. The pipe resin should have UV inhibitors so not sure why that would be.

  4. You also have exposed pipe above the inspector’s test. I know it’s FLA, but what’s going to keep it from freezing?

Leave a Reply

You must be logged in to post a comment.

Submit a comment

Your email address will not be published. Required fields are marked *

You must be logged in to post a comment.

About the author

icon

Ryan J. Smith

Prior to working directly in the fire protection industry, Ryan spent six years working in the property insurance industry working closely with homeowners and insurance underwriters. In 2003 Ryan joined the senior management team of what is now one of the largest and most successful fire protection companies in North America. During this time he became intimately involved in the serious hazards resulting from uncontrolled fires and the dependable benefits of properly designed, installed and maintained fire protection systems. In 2008, he retired from his position to focus on improving home fire protection. As a husband and father of four, residing in Arizona, he is committed to educating the public on the pros and cons of residential fire sprinklers so that informed decisions can be made at the national, state and local levels. As a former business executive in the industry he is committed to the professional training and certification of designers and contractors working with residential fire sprinklers.